Manufacturing Water Treatment Systems
High efficiency meets high quality standards
Parts moving through paint lines, powder coating, and plating processes need effective cleaning and consistent surface preparation to ensure proper adhesion and uniform results. A missed rinse stage or inconsistent chemistry shows up later as adhesion failure, rework, and lost production time.
Riveer’s wash and water treatment systems deliver repeatable pretreatment and equipment washing processes with complete chemical flexibility. Whether your line runs a degreaser, phosphate, zirconium, or nano conversion coating, Riveer systems are engineered to use and recycle the chemistry you already choose. No proprietary chemicals required, so you use what’s best for your process and your budget.
From manual spray wand operations to enclosed booths to fully automated multi-stage pretreatment, Riveer’s engineers help manufacturers save time, chemicals, and water while improving production rates, part cleanliness, and process repeatability, all within a zero-discharge environment.
No Proprietary Chemicals Required
Manufacturers shouldn’t have to choose between the cleaning chemistry that works best for their parts and a system built around a single chemical supplier. Riveer pretreatment and degreasing systems are engineered around your process, not a proprietary formula, so you can use a degreaser, phosphate, zirconium, or nano conversion coating and still recycle it through the same closed-loop system.
That flexibility scales from a single manual spray wand station to a fully automated multi-stage Autowash system, and from an open wash bay to a fully enclosed wash booth with integrated air management, heating, and cooling. Wherever your operation falls on that spectrum, Riveer engineers the capture, treatment, and recovery system around it.
Manufacturing Wash & Pretreatment Features
- No proprietary chemicals required — use the degreaser, phosphate, zirconium, or nano chemistry that fits your process
- Manual spray wand, fully automated, or hybrid operation
- Enclosed wash booths available in any size with air handling, heating, and cooling capabilities
- Zero-discharge technology for EPA and municipal compliance
- Improves part cleanliness, production rates, and process repeatability
- Steel wash racks install without permits, supporting equipment up to 80 tons
- Custom-engineered around your specific parts, chemistry, and production volume
Manufacturing Wash & Pretreatment Applications
- Paint line pretreatment: surface prep before liquid paint application
- Powder coating prep: degreasing and conversion coating ahead of the coating booth
- Plating and E-coat operations: consistent surface cleanliness before plating
- Manual or automated degreasing for production parts and equipment
- Spray wash and containment for ash residue from burn-off ovens
- MRO and depot parts cleaning: enclosed wash booths sized for large components and maintenance work
Related Capabilities
Pretreatment
Equipment Washing
Wash Water Treatment & Filtration
Degreasing
Related Systems
Autowash Multi-Stage Pretreatment
Fully automated, repeatable multi-stage processing
Enclosed Wash Booths
Permanent steel booths with air management
Above Ground Wash Racks
Modular steel racks supporting up to 80 tons, installed without permits
Rain and Water Leak Testing Station
Manual Pretreatment
Manual spray wand pretreatment with closed-loop recycling
Ash Wash
Removes ash residue via multi-stage prefiltration and a spin-down separator, for components up to 20 ft x 12 ft
Oil Water Separators
Manufacturing Water Systems FAQs
Can I use my own pretreatment chemicals with a Riveer system?
Yes. Riveer pretreatment and degreasing systems don’t require proprietary chemicals. They’re engineered to use and recycle the degreaser, phosphate, zirconium, or nano conversion coating your process already calls for.
What's the difference between manual and automated pretreatment?
A manual spray wand system gives an operator direct control for degreasing and pretreating parts, and is a lower-cost entry point for smaller volumes. A fully automated multi-stage system runs parts through degrease, rinse, pretreat, and seal stages without an operator at each step, which suits higher-volume, high-repeatability production lines.
How long can an enclosed wash booth be?
Riveer’s Enclosed Wash Booths can be sized to fit directly into an existing production line. Booths of all sizes are available to meet your exact specifications.
How is ash residue removed after a burn-off cycle?
Riveer’s Ash Wash system uses high-pressure water jets to remove ash residue from racks and components after burn-off, handling parts up to 20 ft x 12 ft. Multi-stage prefiltration and a spin-down separator filter the water after use, ensuring safety and compliance from start to finish.
How much weight can a manufacturing wash rack support?
Riveer’s Above Ground Wash Racks are modular steel systems that can be customized to support equipment and parts up to 80 tons, and install without building permits.
Get Started With a solution
Deploy a washing solution that meets your rigorous standards. Share your specific needs and our team of experts will reach out to discuss the best solution for your challenges.