Water Filtration

Mudmaster™ 3000 Equipment Washing System

Washes, Contains and Recycles

Featuring the TRS Closed-Loop Filtration System

The MudMaster™ 3000 is a closed-loop recycling wash rack which handles moderate to heavy mud loads. Easily broken down and transported in 20′ all-weather ISO containers, MudMaster™ is an ideal solution for deployed applications where vehicle track-out is a concern. The MudMaster™ 3000 employs the RTS 3000 water treatment system to add the remove oils and solids from the water so it may be reused for future washes.

The stainless steel filtration system features inclined plate separators to settle mud in a large initial settling chamber. The chamber is sloped to a valve that automatically purges settled solids every night. Oil coalescing in conjunction with ozone or bacteria injection completes the initial stage. Wash water is recovered with a run-dry diaphragm pump. High-pressure industrial media filtration removes suspended solids, heavy metals, VOC’s and microbes, which is automatically back-washed every night. A final absolute polishing filter cleans the water before sending it to a holding tank. Like all Riveer systems, all water in the system is continuously circulated and injected with ozone.

Building An Equipment Washing System

Watch to see how a MudMaster™ and RTS 3000 water treatment system are assembled piece by piece in this stop-motion video. The MudMaster™ handles moderate to heavy mud loads, and consequently is used for equipment washing on job sites and maintenance areas. The MudMaster™ employs the RTS water treatment system to add the extra automation that higher dirt loads demand.

Mudmaster™ Technologies Include:

Oil skimming
Micron filtration
Ultra filtration, Nano filtration, Reverse Osmosis
Aerobic bacteria injection
EPA Complaint, Zero Discharge
High Throughput Wash, Rinse, Filtration and Reclamation
One Touch Operation
Component modification
System of choice throughout the world

Fast To Setup, Easy To Operate, Simple To Maintain

The MudMaster™ provides a cost effective means of cleaning equipment while preventing ground water contamination and simultaneously reducing water/sewage costs.
Any or all of the components can be set up indoors or outdoors.
The standard MudMaster™ is closed-loop.
Each wash rack is watertight and seals securely to adjoining racks to prevent gaps in containment. All wash water is captured and filtered.
The filter automatically backwashes when needed
Settled mud is automatically purged with high-pressure water
Oil coalescing with automatic oil skimming
Automatic 24/7 ozone injection
Automatic 24/7 bacteria and air injection with pH adjust
Continuous recirculation

inside mudmaster 3000 booth
inside mudmaster 3000 booth
outside mudmaster 3000 booth
inside mudmaster 3000 booth
outside mudmaster 3000 booth
inside mudmaster 3000 booth